Fitting programs the patient's hearing aid(s) using a variety of features including Fine Tuning, Frequency Lowering, and Environment Manager/Noise Control to precisely fit the devices based on the patient's lifestyle and desires. Click on any option below for more information.
QuickFit - Makes simple and quick adjustments to the patient's hearing aid(s) and accesses Fine Tuning, Experience Level, Feedback Canceller, and/or Self Check
Fine Tuning - Makes discrete, frequency-specific adjustments to band, channel, and maximum output
User Controls - Configures patient controls for volume control, memory, tinnitus, balance control, mute, autophone memories, and T² remote control, depending upon whether or not the hearing aid contains a physical switch, syncs binaural wireless hearing aids to communicate with each other, controls the amount of VC reserve gain or Tinnitus reserve output available, or enables/disables Self Learning
CROS/BiCROS - Customizes the patient's receiver aid based on his/her lifestyle by configuring the mode for each memory and adjusting the level of sounds coming from the transmitter relative to the receiver aid
Experience Manager - Transitions a new, inexperienced hearing aid patient from initial, spontaneously accepted gain settings to the final, desired, target settings
Feedback Canceller - Prevents feedback in a wide variety of environments by setting the desired adjustment control (Off, Static, or Adaptive) per memory
Compression - Makes discrete, frequency-specific adjustments to threshold kneepoints and compression ratio per memory and channel
Frequency Lowering - Translates inaudible, high frequency, speech information to a lower frequency region so it's audible
Environment Manager/Noise Control - Prioritizes speech in noise by making discrete adjustments per memory to Speech and Noise/Noise, SoundScapes, and Acuity Directionality/InVision Directionality, and enhances sound quality and reduces listening effort by automatically adjusting synced wireless hearing aids to facilitate the best signal-to-noise ratio (SNR) and comfort in any listening situation
Tinnitus - Generates a white noise stimulus and allows you to make discrete, frequency-specific band adjustments per memory
Memories - Selects environments that will modify the frequency shaping and/or compression characteristics of the hearing aid within that memory
Accessories - Selects and configures accessories to adjust volume, memory, etc. using a remote control or stream audio from a mobile phone, MP3 player, computer, television, DVD player, etc. directly to wireless hearing aids
Indicators - Sets and adjusts the signals that inform the patient of a low battery, memory change, volume increase/decrease, etc., selects the language for speech indicators, and enables/disables any desired indicators
Fitting Summary - Provides a quick visual overview of the hearing aid’s features and setting information including memory environments, environment manager/noise control, indicators, status, etc.
Data Log - Analyzes actual patient data collected while the patient was wearing the hearing aids in different environments, applies recommendations based on the data, demonstrates the usage and benefit of amplification to the patient and their family, and troubleshoots issues during follow-up visits