Fitting Report

The Fitting Report prints details regarding a live or simulated fitting, including indicators, configuration, audiogram, programs, graphs, etc. Only the data applicable to the hearing aid prints on the report. If the feature is supported and enabled, either a "checkmark" or "On" prints, but if it's disabled, either dashes (....) or "Off" print. If the feature is not supported or enabled (e.g., telephone indicator, mute indicator, etc.), "N/A" prints. If fitting binaurally, each hearing aid prints on its own page. However, only the receiver aid prints if fitting 2.4 GHz CROS/BiCROS devices. The Report Header options selected via Reports Preferences determine the logo/text and patient information that prints at the report's top.

 

Whenever a session is saved in Pro Fit, if Include FastData when saving sessions to Noah is checked via General Preferences, a .pdf containing the session notes and device page of the Fitting Report, and if checked, the REM Target Match graph, for all ear sides, is saved to Noah.

  1. Connect and select the desired hearing aid(s) to report via Connect.
  2. Click Connect.
  3. Adjust the hearing aid(s) if desired.
  4. Click File from the Menu Bar.
  5. Click Print to print and/or preview the report.
    Tip:  Click Print via Fitting Summary to print and/or preview the report.
  6. Click Fitting Report.
  7. Check Include Session Notes to print the session notes if desired.
    Note:  This option is only available if session notes data exists. If checked, the session notes print on the report's first page.
  8. Check Include Numeric Info to print channel specific values for each program if desired.
  9. Check Include Graphs to print a fitting graph for each program if desired.
  10. Check Include Streaming to print channel specific values and/or a fitting graph for Audio Streaming if desired.
    Note:  This option is only available for Omega AI and Edge AI products and only enabled if Include Numeric Info or Include Graphs is selected.
  11. Uncheck Include REM Target Match to not print the Real-Ear Aided Response (REAR) measured curves matched to the targets for the inputs measured via REM Target Match.
    Note:  This option is only available if REM Target Match was applied during the current session.

  12. Click Print or Print Preview.

    Tip:  Click Close to cancel the report and close the Print screen.
  13. If Print was selected, change any desired settings and click Print. If Print Preview was selected, navigate or print the report report using the options on the Print Preview Toolbar.
    Fitting Report Description
    Report Header Manufacturer's logo, company's logo, or customized text. Prints based on the Report Header selected via Reports Preferences.
    Customized for Patient's name. Only prints if Patient Name was selected via Reports Preferences.
    DOB Patient's date of birth. Only prints if Patient Date of Birth was selected via Reports Preferences.
    Session Date of the current or retrieved session. Only prints if Session Date / Date of Test was selected via Reports Preferences.

    Session Notes (only prints if Include Session Notes was selected when generating the report)
    Session Notes Session Notes data.

    Fitting Report - Right/Left Ear
    S/N, FW, Model, Receiver/Power Level, Acoustic Options, VC Range; Step Size, Auto Experience Manager/Experience Level, Feedback Canceller, Fitting Formula, Power-On Delay, Self Check Status, Auto Sleep, SCIF Mode, Motion Optimized, and/or CROS Indicates the right/left hearing aid's serial number, firmware version, product family, circuit, and style, and the current configuration of the device's features. Only the features supported print.

    Audiogram
    Air Thresholds (dB HL), Bone Thresholds (dB HL), and UCL Thresholds (dB HL) Office system or In-situ air conduction, bone conduction, and UCL scores. An asterisk represents no response.

    Hearing Aid Features
    Program 1-4 Lists the hearing aid's programs.
    CROS (only prints if fitting or simulating CROS/BiCROS hearing aids) Indicates the mode setting in the specific program.
    Hz Lowering (Strength and Gain) (only prints if the hearing aid supports this feature) Indicates the Frequency Lowering Bandwidth and Gain setting in the specific program.
    Tinnitus (Stimulus) Indicates the Shape selected in the specific program.
    Feedback (Setting) Indicates the adjustment control setting in the specific program.

    Adaptive Features
    Program 1-4 Lists the hearing aid's programs.
    Strength, (Binaural) Speech in Loud Noise, Speech in Noise, Quiet, Transients, (Binaural) Wind, and (Binaural) Machine Indicates the amount of adaptation per environment in the specific program. Only the environments supported print.
    Directionality (Binaural) Mode (only prints if the hearing aid supports a directional system) Indicates the directional setting in the specific program.
    (Binaural) Spatial Adaptation (only prints if the hearing aid supports this feature) Denotes whether the feature is enabled in the specific program.

    Indicators
    Low Battery, Startup Sound, Sleep Sound, Program/Home, CROS Stream Start, CROS Stream Stop, Telephone, Volume, Balance, Tinnitus Level, Accessory Stream, Mute, T2 Wake, Manual Alert, Assistant, Edge Mode+, Offline Mode, and/or Indicator Lights Denotes whether or not the hearing aid's specific indicator is enabled.

    User Controls
    Program, Volume, Balance, Tinnitus Level, Sleep Mode, Mute, Stream, Smart Assistant, Edge Mode+, Offline Mode, and/or T2 Remote Indicates how the user controls are configured, whether T2 Remote is enabled, and whether Ear to Ear synchronization is enabled for the specific feature. Only the user controls and features supported print.

    Accessories
    Remote, Remote Mic +, TV Streamer, Mini Remote Mic, and Table Mic Lists the accessories paired with the aids.

    Channel Specific Values (only prints if Include Numeric Info was selected when generating the report)
    Display Values (2cc Coupler Gain - Speech), Program 1-4 and Audio Streaming (only prints if Include Streaming was selected when generating the report), Loud (dB), CR (Moderate), Moderate (dB), CR (Soft), Soft (dB), and MPO (dB SPL) Adjustment values per frequency.

    Fitting Graph (only prints if Include Graphs was selected when generating the report)
    Program 1-4 and Audio Streaming (only prints if Include Streaming was selected when generating the report) Fitting Graph The graphical view currently selected prints on the fitting graph except for Multicurve. If Auto Experience was enabled and Show Auto Experience Manager final settings when the feature is enabled is selected via Target Preferences, the Auto Experience Manager's final gain settings print rather than the fitting formula's targets.
    Graph Legend Identifies the curves and shaded regions on the graph. The target and response levels print based on the Target Levels selected via Target Preferences.

    REM Target Match Graph (only prints if Include REM Target Match was selected when generating the report)
    Fitting Graph Real-Ear Aided Response (REAR) measured curves matched to the targets for the inputs measured via REM Target Match when applied during the current session.
    Graph Legend Identifies the curves on the graph.
  14. If Print Preview was selected, click X on the Title Bar to close.
  15. Click Close to close the Print screen.