Quick Fit

Quick Fit makes simple and quick adjustments to Occlusion Control, Low-Frequency Gain, High-Frequency Gain, Overall Gain, Output, Overall Soft Music Gain, Bass, Mid, and Treble. Occlusion ControlOcclusion Control (Adjusts the overall gain below 750 Hz for voice control.), Low-Frequency GainLow-Frequency Gain (Adjusts the overall gain between 100-1875 Hz.), and High-Frequency GainHigh-Frequency Gain (Adjusts the overall gain between 2187.5-7812.5 Hz or 1875-10k Hz.) adjusts the overall gain at a range of specific frequencies, Overall Gain adjusts the overall gain, and Output modifies the maximum output. Overall Soft Music Gain adjusts the overall music gain, and BassBass (Adjusts the overall music gain between 100-625 Hz.), MidMid (Adjusts the overall music gain between 625-3125 Hz.), and TrebleTreble (Adjusts the overall music gain between 3125-10k Hz.) adjusts the overall music gain at a range of specific frequencies for the Music program. The adjustment range for these products is -10 to +10. An entire curve, multiple frequencies, or a single frequency can also be adjusted graphically, except for Music, by dragging and dropping points on the frequency response curve.

  1. Connect and select the desired hearing aid(s) to adjust via Connect.
  2. Click Connect.
  3. Click Quick Fit from the Left Navigation Menu.
    Tip:  Click via Fine Tuning to access.

  4. Click on the specific program to adjust if applicable, or click to adjust all programs simultaneously.

    Note:  If one-way program linking is enabled , only gain and output adjustments made to *Personal will be applied simultaneously to all one-way linked programs. Custom programs created in the My Starkey mobile application can be adjusted during a live fitting. See Adjusting Custom Programs During a Live Fitting for more information.
    Note:  Click Information for information on adjusting the Music program.

  5. Pro Fit automatically defaults to a binaural view if applicable. To adjust only the right or left hearing aid, click Select Right Only or Select Left Only.

    Note:  If fitting CROS/BiCROS devices, only the receiver aid can be adjusted; therefore, the side cannot be selected.
  6. Click the up or down arrow keys to increase or decrease the overall gain or output binaurally or per ear side.
    Note:  Increasing gain will not affect reserve gain for products with volume control adjustment capabilities. Increasing gain will affect reserve gain for products with no volume control adjustment capabilities.
    Tip:  Adjustments can be made graphically by dragging and dropping points on the frequency response curve. If Display Max Output Line on all SPL Graphs is not selected via General Preferences, maximum output cannot be adjusted graphically.
  7. Click Fine Tuning to fine tune the hearing aid(s).