Wireless Preferences

Wireless Preferences indicates if the patient's name should display for wireless hearing aids, identifies the wireless hearing aid serial numbers that should be ignored when the Starkey 2.4 GHz Wireless/TruLink, Noahlink Wireless 2, Noahlink Wireless, and/or SurfLink Programmer detects devices, and selects the wireless radio frequency profile for the SurfLink Programmer only.

1. Click Preferences from the Menu Bar.
2. Click Wireless.
3. Enter or edit wireless settingswireless settings.

   * If the wireless profile was changed, exit Inspire and reaccess to implement the change

   Field Name	Description	Details
   Show Patient Name for Wireless Devices	Denotes whether or not to display the patient's name in the Devices Detected section of the Get Started screen or the Devices Detected pop-up for wireless hearing aids.	The default is to show the patient's name. If unchecked, the patient's name displays in a tool tip by pointing to the hearing aid information.
   Wireless Profile*	Selects the wireless radio frequency profile that's different from the default Inspire edition and language's profile.	If a different profile is selected, only hearing aids that were branded for the selected profile will be detected without changing the Inspire edition and language. The profiles available are Automatic, Australia, Brazil, Canada, Columbia, Europe, India, Korea, Mexico, Philippines, South Africa, Thailand, United States and NeutralNeutral(If two hearing aids are configured for different wireless profiles (e.g., United States and Europe), they can't be fit binaurally unless Neutral is selected.). The default profile is Automatic and if selected, determines the current profile based on the Location selected via Configuration Preferences.
   Ignore Serial Numbers During Discovery	Identifies the wireless serial numbers that should be ignored when the Starkey 2.4 GHz Wireless/TruLink, Noahlink Wireless 2, Noahlink Wireless, and/or SurfLink Programmer detects devices.	A maximum of 12 serial numbers can be identified. These serial numbers are disregarded if the hearing aid is connected to a wired programmer (e.g., Hi-Pro, SpeedPort, etc.).

4. To add a serial number, click in the Hearing Aid Serial Number field and enter the serial number.
5. Click Add.
6. To delete a serial number, click on the serial number.
7. Click Remove.
8. Click OK to save the settings for this session and return to the currently displayed screen.

   Tip:  Click Cancel to discard the changes and return to the currently displayed screen.

   Tip:  Click Apply to save the settings for this session but remain in the Preferences menu.

   Tip:  Click Restore to Inspire Defaults to revert the aforementioned Inspire defaults back to their original default settings.