Connect Preferences

Connect Preferences indicates if the patient's name should be displayed for hearing aids and identifies the wireless hearing aid serial numbers that should be ignored when the Noahlink Wireless 2 and/or Noahlink Wireless Programmers detect devices.

  1. Click Preferences from the Menu Bar.
  2. Click Connect.
  3. Enter or edit connect settings connect settings.
    Field Name Description Details

    Show Patient Name for Devices

    Denotes whether or not to display the patient's name on the Connect screen or the Apply Session Settings pop-up for hearing aids.

    The default is to show the patient's name. If unchecked, the patient's name displays in a tooltip by pointing to "Name Hidden".
    Ignore Serial Numbers During Wireless Discovery Identifies the wireless serial numbers that should be ignored when the Noahlink Wireless 2 and/or Noahlink Wireless Programmer detects devices. A maximum of 12 serial numbers can be identified. These serial numbers are disregarded if the hearing aid is connected to a wired programmer (e.g., USB Hi-Pro, SpeedPort, etc.).
  4. To add a serial number, click in the Hearing Aid Serial Number field and enter the serial number.
  5. Click Add.
  6. To delete a serial number, click on the serial number.
  7. Click Remove.
  8. Click OK to save the settings for this session and return to the currently displayed screen.
    Tip:  Click Cancel to discard the changes and return to the currently displayed screen.
    Tip:  Click Apply to save the settings for this session but remain in the Preferences menu.
    Tip:  Click Restore to Pro Fit Defaults to revert the aforementioned Pro Fit defaults back to their original default settings.