Connect and select the desired hearing aid(s) to program via Get Started.
Click on the Load a
Previous Session radio button to open a previously saved fitting
session for the selected patient and then click 
.
Click on the session to open.
Note: Sessions
are listed in reverse chronological order, with the most recent
session at the top of the list. The ear side ( ,  ,
or  ) fitted or connected, Noah
or ProHear user name, time, product family
and tier, and session description, if applicable, displays
per fitting session. |
| Note: If binaural hearing aids are connected and the session selected is for one ear side, both ear sides will be opened. |
Click OK to load the settings from the selected session into the hearing aid(s).
| Tip: If the session selected does not match the connected hearing aid's fitting session, Swap Fit automatically launches. |
| Note: If the hearing aid(s) contains a lock code and it doesn't match the code via General Preferences, it must be entered to unlock the aid before the settings can be loaded. Enter the 4 digit code and click OK. If the correct code is entered or if the code matched the code via General Preferences initially, the hearing aid is automatically unlocked and must be locked again if desired via Device Access Settings. If the code is unknown, click Cancel to cancel loading the settings and return to the Get Started screen or click Set To Factory Settings to clear all settings and patient data from the hearing aid and return it to the factory settings. |
| Note: If only one wireless hearing aid was connected that is paired with another aid that was not connected, a message displays to connect the partner. Click OK to fit monaurally or click Cancel to cancel opening the saved session and return to the Get Started screen. |
| Note: The Default Fitting View selected via General Preferences automatically displays. |
| Tip: Click Cancel to cancel opening a session. |