Connect and select the desired hearing aid(s) to report via Get Started.
Click on the Read Device Settings or Load a Previous Session radio
button and then click 
.
Adjust the hearing aid(s) if desired.
Click File from the Menu Bar.
Click Print to print and/or preview the report.
Tip: Click Print via Fitting Summary or click  on the Inspire Toolbar to print and/or preview the report. |
Click Fitting Report.
| Note: Fitting Report is automatically selected if Print was accessed via any Fitting or Advanced Tools screen. |
Check Include Fitting Comments to print the fitting comments if desired.
| Note: This option is only available if fitting comments were entered via Fitting Summary. If checked, the fitting comments print on the last page of the report. |
Check Include numeric info to print channel specific values for each memory if desired.
Check Include graphs to print a fitting graph for each memory if desired.
Click Print or Print Preview.
| Tip: Click Cancel to cancel the report and close the Print screen. |
If Print was selected, change any print settings if desired and click Print. If Print Preview was selected, navigate or print the report using the options on the Print Preview Toolbar.
| Fitting Report | Description |
| Report Header | Manufacturer's logo, company's logo, or customized text. Prints based on the Report Header selected via Reports Preferences. |
| Customized for | Patient's name. Only prints if Patient Name was selected via Reports Preferences. |
| DOB | Patient's date of birth. Only prints if Patient Date of Birth was selected via Reports Preferences. |
| Session | Date of the current or retrieved session. Only prints if Session Date was selected via Reports Preferences. |
|
Fitting Report - Right/Left Ear |
|
| S/N, FW, Model, Matrix, Acoustic Options, VC Range/Reserve Gain; Step Size, VC Self Learning, Auto Experience Manager/Experience Level, Feedback Canceller, Fitting Formula, T2 On Demand, Power-On Delay, Self Check Status, Reminder Time, OCL Fast, CROS, and/or MPO Boost | Indicates the right/left hearing aid's serial number, firmware version, product family, circuit, and style, and the current configuration of the device's features. Only the features supported print. |
|
Audiogram |
|
| Air Thresholds (dB HL), Bone Thresholds (dB HL), and UCL Thresholds (dB HL) | Office system or In-situ air conduction, bone conduction, and UCL scores. An asterisk represents no response. |
|
Hearing Aid Features |
|
| Memory 1-4 and Stream Boost: On/Off | Lists the hearing aid's memories. |
| CROS (only prints if fitting or simulating CROS/BiCROS hearing aids) | Indicates the mode setting in the specific memory. |
| Hz Lowering* (Strength and Gain) (only prints if the hearing aid supports this feature) | Indicates the Frequency Lowering Bandwidth and Gain setting in the specific memory. |
| Tinnitus (Stimulus) (only prints if fitting or simulating Honor, Pride, Pride IIC, Z Series, and Xino Tinnitus hearing aids) | Denotes whether or not Tinnitus is enabled in the specific memory. |
| Audio Streaming* (Streaming and Mic Setting) (only prints if the hearing aid is wireless {except Honor and Halo} and a wireless streaming accessory was enabled via Accessories) | Denotes whether or not audio streaming is enabled in the specific memory and the hearing aid's microphone setting while streaming. |
| DAI (DAI Setting and Dynamic FM) (only prints if the hearing aid supports this feature) | Indicates the DAI setting in the specific memory and denotes whether or not Dynamic FM is enabled. |
|
Adaptive Features |
|
| Memory 1-4, Stream Boost: On/Off and Ear to Ear | Lists the hearing aid's memories and Ear to Ear (only prints if the hearing aid is wireless). |
| Speech and Noise/Noise, Quiet, Wind, and Machine Noise | Indicates the amount of adaptation per environment in the specific memory and denotes whether or not Ear to Ear is enabled in the specific environment. Only the environments supported print. |
| Music (only prints if fitting or simulating select Honor, Pride, or Pride IIC hearing aids) | Indicates the strength of music adaptation in the specific memory and denotes whether or not Ear to Ear is enabled. |
| Directionality (Mode, Plus, and Roll Off) (only prints if the hearing aid supports a directional system) | Indicates the directional setting in the specific memory, denotes whether or not directionality plus is enabled, indicates how much low frequency amplification should be reduced when switching from omni to directional mode, and denotes whether or not Ear to Ear is enabled in the specific feature. Only the features supported print. |
| Feedback Canceller* (Setting) | Indicates the adjustment control setting in the specific memory. |
|
Indicators |
|
| Low Battery, Power-On Sound, Memory/Home or Memory Change, CROS Stream Start, CROS Stream Stop, TruLink/Stream Boost, Telephone, Volume, Volume/Balance Control, Volume Max, Volume Increase, Volume Programmed/Volume Home, Volume Decrease, Volume Min, Tinnitus, Shutdown, Mute/Standby, Self Check: Pass, Self Check: Fail, Reminder, T2 Wake, Comfort Boost, Favorite Button, and/or Cell Phone | Denotes whether or not the hearing aid's specific indicator is enabled. |
|
User Controls |
|
| Memory, Volume, Balance, Tinnitus, Mute, and/or T2 Remote | Indicates how the user controls are configured, denotes whether or not T2 Remote is enabled, and denotes whether or not Ear to Ear synchronization is enabled for the specific feature. Only the user controls and features supported print. |
|
Accessories |
|
| SurfLink Remote, SurfLink Mobile, SurfLink Media and Remote Mic | Denotes whether or not the wireless accessory is enabled. |
|
Channel Specific Values (only prints if Include numeric info was selected when generating the report) |
|
| Display Values (Graph View - Input Type), Memory 1-4 and Stream Boost: On/Off, Loud (dB), CR (Moderate), Moderate (dB), CR (Soft), Soft (dB), and MPO (dB SPL) (for Honor, Pride, Halo, Z Series, 3 Series, Pride IIC, Xino Wireless, and Xino Tinnitus products) | Adjustment values per frequency. |
| Display Values (Graph View - Input Type), Memory 1-4, Loud (dB), Overall (dB), Soft (dB), CR, MPO (dB SPL), and Kneepoint (dB SPL) (for Xino Wired, Wi Series, Ignite, X Series, S Series iQ, S Series, and E Series products) | Adjustment values per frequency. Overall (dB) refers to Moderate (dB). |
| Display Values (Graph View - Input Type), Memory 1-4, Loud (dB), Soft (dB), CR, MPO (dB SPL), and Kneepoint (dB SPL) (for Xino Classic, Zōn, and Destiny products) | Adjustment values per channel. |
|
Fitting Graph* (only prints if Include graphs was selected when generating the report) |
|
| Fitting Graph | The graphical view currently selected prints on the fitting graph with the exception of Multicurve. If Auto Experience Manager was enabled and Show Auto Experience Manager level when the feature is enabled is selected via Target Preferences, the Auto Experience Manager's final gain settings print rather than the fitting formula's targets. |
| Graph Legend | Identifies the curves and shaded regions on the graph. The target and response levels print based on the Target Levels selected via Target Preferences. |
|
Fitting Comments (only prints if Include Fitting Comments was selected when generating the report) |
|
| Fitting Comments | Fitting comments entered via Fitting Summary. |
If Print Preview was selected, click X on the Title Bar to close.
Click Cancel to close the Print screen.