Fine Tuning Advance 24, Advance 25, Advance 23, and Advance 22 Products

Fine Tuning makes discrete, frequency-specific adjustments to Band, Channel, Maximum Output, and User Volume. Band adjusts the overall gain at specific frequencies, Channel changes the specific gain and compression settings, Maximum Output modifies the maximum output, and User Volume controls the amount of reserve gain available. Adjustments can be made to each individual band and channel, to groups of bands and channels labeled low frequencies, mid frequencies or high frequencies, or to all bands and channels simultaneously.

Adjustments can be made via three views. The Basic View displays current numerical gain values per ear side for specific frequency ranges or individual channels depending on the state of each frequency range control (expanded or collapsed). Adjustments to the selected cells can be made via up and down arrows. The Slider View displays the average numerical gain values per ear side for each channel. Adjustments per input range (All, Loud, or Soft) or maximum output (MPO) can be made via slider bars. The Volume Control displays the step size, reserve gain, and/or range and provides access to User Control Configuration. In addition, all adjustments can be made graphically.

1. Connect and select the desired hearing aid(s) to fine tune via Get Started.

2. Click Quick Connect or Session Connect.

   Note:  If Advanced is selected for the default fitting view via General Preferences, the Fine Tuning screen automatically displays. Continue at step 5.

3. Click Fitting from the Left Navigation Menu.

4. Click Fine Tuning.

5. Make adjustments via Basic View, Slider View, or Volume Control screens.

   Note:  The Basic View automatically defaults. If the Slider View was last selected, this view automatically defaults the next time Fine Tuning is accessed for similar products in a new session.

Fine Tuning via Basic View

1. Click Basic View if not currently displayed.

2. Click to display the numerical values for gain and output for all channels.

Tip:  Click to hide the numerical values.

3. Click on the specific memory to adjust if applicable or click to adjust all memories simultaneously.

4. Inspire automatically defaults to a binaural view if applicable. To adjust only the right or left hearing aid, click or .

5. Click on the frequency/output or group of frequencies/inputs/outputs to adjust.

   Tip:  To select a sequential group of frequencies, click on the beginning column header or frequency cell, press and hold Shift and click on the ending column header or frequency cell and all columns or frequencies between the two clicks will be selected, or press and hold the left mouse button and drag to the left or right until the desired group of frequencies are selected and then release the left mouse button. To select a non-sequential group of frequencies within a row, press and hold Ctrl and click on the desired frequencies. To select a specific frequency range, click the column header (Low Frequencies, Mid Frequencies, or High Frequencies) or click to select all frequencies. Selected frequencies are represented in bold (purple, green, blue, or black) on the fitting graph and orange on the table.

6. Click the up or down arrow keys to increase or decrease the gain or output per ear side or binaurally.

   Tip:  Adjustments can also be made graphically by dragging and dropping points on the frequency response curve. If Display Max Output Line on all SPL Graphs is not selected via General Preferences, MPO cannot be adjusted graphically.

Fine Tuning via Slider View

1. Click Slider View .

2. Click on the specific memory to adjust if applicable or click to adjust all memories simultaneously.

3. Inspire automatically defaults to a binaural view if applicable. To adjust only the right or left hearing aid, click or .

4. Click on the specific input range (All, Loud, or Soft) or maximum output (MPO) to adjust.

   Note:  The average numerical gain values per ear side for each frequency displays based on the input/output selected. Selected inputs/output are represented in bold (purple, green, blue, or black) on the fitting graph and orange to the left of the sliders.

5. Drag the slider bars to increase or decrease the gain or output per ear side or click the up or down arrow keys to increase or decrease binaurally.

   Note:  The gray area on the slider bars represents the range of possible adjustment and the white area represents available reserve gain. When the white area is located at the bottom of the slider, that particular band or channel has no remaining reserve gain.

   Tip:  Adjustments can also be made graphically by dragging and dropping points on the frequency response curve. If Display Max Output Line on all SPL Graphs is not selected via General Preferences, MPO cannot be adjusted graphically.

Fine Tuning Volume Control

1. Click VC from the Slider View.

   Note:  Volume Control automatically displays on the Basic View.

2. Click User Control Configuration to change any volume control configurations if applicable.

3. Inspire automatically defaults to a binaural view if applicable. To adjust only the right or left hearing aid, click or .

4. Select the desired step size, reserve gain, and/or range from the drop down lists.

   Note:  Volume control adjustments can only be made to Memory 1. The options available for step size are 2 and 4 dB. The options available for reserve gain are based on the step size selected. If step size 2 db is selected, the reserve gain options are 0, 2, 4, and 6 dB. If step size 4 dB is selected, the reserve gain options are 0, 4, 8, and 12 dB. The options available for range are 8, 12, 20, and 40 dB. This number represents the total volume range. By changing the slider on the right, the amount of available gain above and below use gain is adjusted. If the hearing aid contains a continuous digital VC, only step size 2 dB is available and the reserve gain options are 0, 2, 4, 6, and 8 dB. If the hearing aid contains a standard analog VC, step size is not applicable and the reserve gain is always 8 dB.

5. Click the up or down arrow keys to increase or decrease the reserve gain per ear side, if available.

   Note:  These controls are only available on select volume control devices. User volume control for touch tone phones (T²) can be adjusted via this screen.