Specsavers

User Volume

User Volume displays the average user volume change by sound class per memory, overall user volume, time spent per sound class, current environmental adaptation setting, and dB adjustment. If the patient can adjust the hearing aid's volume, this data is collected. This feature is available on all products except Advance 22, Advance 21, and Advance 20.

Inspire automatically compares the information in the data log against the current settings of the hearing aid. Based on the objective data contained in the data log, Inspire may provide a set of recommendations per memory in an effort to improve the performance of the specific hearing aid. Some recommendations can be applied to the hearing aid and some suggest counseling the patient on usage, feedback prevention, etc. Data Log can also be used to demonstrate the usage and benefit of amplification to the patient and third party, and troubleshoot issues during follow-up visits. The data log can be reset at any time.

  1. Connect and select the desired hearing aid(s) to view via Get Started.

  2. Click Quick Connect or Session Connect.

  3. Click Data Log from the Left Navigation Menu.

  4. Click User Volume.

    User Volume Description
    Avg User Volume Change by Sound Class Graphs the volume change per sound class for each ear side. The amount of change made to the volume control relative to the programmed volume control setting (0) can be displayed in a tool tip by pointing to the overall value for a specific sound class.
    Time Spent per Sound Cass Percent of time spent per sound class for each ear side. Some products don't support Speech in Noise, therefore, data for this class is averaged with Noise and displayed under this class.
    Setting Current environmental detection setting per sound class for each ear side. Settings are selected via Noise Control.
    dB Adjustment Volume control adjustment range. Increments are based on the hearing aid's volume range. If viewing binaurally and the two hearing aids contain different adjustment ranges, the largest range displays.

  5. Inspire automatically defaults to a binaural Select Binaural view if applicable. To view only the right or left hearing aid, click Select Right Only or Select Left Only.

  6. Click on the memory tab to display user volume for the specific memory if desired.

    Note:  The All tab is not available for this view.

  7. Click the down arrow to collapse the recommendations if desired.

    Tip:  Click the up arrow to expand the recommendations if desired.

 

Applying Recommendations

  1. Click on the memory tab to display recommendations for the specific memory if desired.

    Note:  The All tab is not available for this view.

  2. Uncheck any recommendations to not apply.

  3. Click Apply Recommendations.

 

Resetting the Data Log

  1. Click Reset Data Log and a dialog box appears asking you to confirm the reset.

    Tip:  Click Tools from the Menu Bar and click Reset Data Log.

  2. To reset only the right or left hearing aid, uncheck Right or Left.

  3. Click Yes to clear the data log from the selected hearing aid(s).

    Note:  The previously read data log remains on the screen so that it can be saved with the current fitting session. However, the data log dates range reflects that it has been reset.
     
    Tip:  Click No to cancel the reset.